REYNOFIX

REYNOFIX

TAC REYNOFIX
SPECIAL POLYMER MODIFIED MORTAR

FAB (Features, Benefits & Advantages)
For both interior floor and wall applications and for exterior floor applications
For installation of vitrified/fully vitrified tiles & glass
mosaic tiles
Suitable for installations where background and location is more demanding like wet areas, submerged areas etc.
an be used to install tiles on to various substrates like: Concrete Masonry, Cement Mortar Beds, Cement Plaster, Existing Vitrified Tile & Ceramic Tile, Brick Masonry, Cement Terrazzo, Existing Natural Stone

Description

Coverage

Approx. 45 to 50 sq.ft. per 20 Kg pack, using 6mm x 6mm square notched trowel for a bed of 3mm
Coverage will depend on the nature and flatness of the surface and the method of application
For good coverage, it is must that all surfaces are smooth, plumb, level and free from defects and undulations.

Working Properties at 27° C

TAC REYNOFIX Adhesive mixed with Water

Technical data

IS Data
Property: Test method	Requirement	Typical Values
Tensile Adhesion
Dry Condition- Annex A (Clause 5.1)	Minimum 1.00 N/mm²	1 N/mm²
Wet Conditions Annex A (Clause5.1)	Minimum 1.00 N/mm²	1 N/mm²
Dry Conditions Annex B (Clause 5.2)	Minimum 1:25 N/mm²	1.1-1.2 N/mm²
Heat Ageing Annex B (Clause 5.2)	Minimum 1.00 N/mm²	1 N/mm²
Wet Conditions Annex B (Clause 5.2).	Minimum 1.00 N/mm²	1 N/mm²
Sipresistance Annex E(Clause 5.5)	$0.5mm	0.30-0.45mm

Standard

TAC REYNOFIX complies to IS 15477:2019,CML No. 8400211808 “Reynofix” Also complies with EN C1TE classfication.

There are no reviews yet.

Be the first to review “REYNOFIX”