Stone Tite

Application Instruction:

. Ensure the surface of stones to be bonded are clean, dry, and free from any dust, oil & debris.

. Apply a thin film of adhesive on one surface of stone using a suitable tool.

. Carefully position the other stone onto the adhesive-coated stone surface, aligning it as desired.

. Apply gentle pressure to ensure proper contact and remove any excess adhesive.

. Allow the adhesive to cure for minimum 30 minutes for initial grab and24 hours for obtaining full bond strength.

Additional Information:

Chemical Composition:  MS Polymer based adhesive

Physical State: Semi Solid (Paste)

Curing Time: 24 hours at 25⁰C

Hardening time: 3-4 hours

Specific Gravity: 1.20 g/ml

Pot life: 10 minutes at 25⁰C

Working Temperature Range: -40⁰C to 120⁰C